|
There are currently no product reviews.
 ;
I'm happy to get a manual from this rare old amp. The pdf is from good qualty.
;
very quick service and manual as described - would happily trade here again!
;
Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
;
The manual was as described. Complete with parts list and technical information. Fast delivery.
 ;
Simple and fast...
The diagrams are clear and legible; i have been a great help.
The site is very reliable and precise thanks.
Using the Menus
Using the Timer
Menu
Video Audio Channel Parent Timer Setup Basic
To access the Timer menu, use the following steps:
To Display
To Highlight
To Select
Timer 1 : Set Timer 2 : Set Current Time
Program
Program the time Move: Select:
: End:
AM
Current Time
Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press .
2
Press
to exit the menu.
�
You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Timer 2 Scheduled viewing
Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press .
2
3
Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. Press to exit the menu.
� �
Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
39
|
