|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good manual for Technics SL 303. Manuale molto utile.
;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
Notes � If you connect a monaural VCR, connect the yellow plug to
(the
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player, camcorder, video game or stereo system. To watch the picture of the connected equipment, press � (see page 12).
yellow jack) and the black plug to -L (MONO) (the white jack). � If you connect a VCR to the � (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV. � When no signal is input to the connected video equipment, the TV screen becomes blue.
CAUTION
Do not connect the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
Connecting a camcorder/video game equipment using the � (video input) jacks
Front of TV Audio/Video cable (not supplied)
To� 2 (video input)
ONE-PUSH AUTOMATIC PROGRAMING
Step 2
Insert the batteries into the remote
Note � Do not use old batteries nor use different types of batteries together.
To video and audio outputs
Camcorder
or
Video game equipment
2
Step 3
Preset the channels automatically
Front of TV
: Signal flow
1
Note � You can also connect video equipment to the � 1 (video input) jacks at the rear of your TV.
11 �
Connecting audio/video equipment using the � (monitor output) jacks
Antenna cable (not supplied)
KV-HF51P50/XF21M80/XF21M83/XF21N90/XF51M65
2
ONE-PUSH AUTOMATIC PROGRAMING
ONE-PUSH AUTOMATIC PROGRAMMING
1
1
Using Your New TV
Rear of TV To antenna output
VHF LOW
B/G
Audio system
RM-915 RM-952
L(MONO)
VCR
or
To audio inputs
Tips � If you want to exit automatic channel presetting, press SELECT twice. � If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 9).
1
To video and audio inputs
or
(yellow) -L (MONO) (white) -R (red) To � (monitor output) Audio/Video cable (not supplied)
Now You Are Ready. . . To watch your TV, see page 11.
: Signal flow
Note � When connecting a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack).
Using Your New TV
5
6
Using Your New TV
|
|
|
> |
|
