Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Immediate response with excellent service - highly reccommended
Text excerpt from page 5 (click to view)
Getting Started
p KV-J14P2S
Connections
Rear of TV
to antenna socket
�
�
�
to
D
to antenna output VCR
� (video input) D (video) and � (audio) inputs
to antenna socket
to video and audio outputs
: Signal flow
Connecting a VHF antenna or a combination VHF/UHF antenna � 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the
Rear of TV Rear of TV
On a wall
p KV-J51PF2S
(antenna) socket at the rear of the TV.
Rear of TV
R
�L(MONO) D
to antenna output VCR
�
or
�
to � (video input) D (video) and � (audio) inputs to video and audio outputs : Signal flow
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, or video game.
Do not use the � (video input) jacks at the front and the rear of your TV simultaneously; otherwise the picture will not be displayed properly on the screen.
When using the
� (video input) jack
� 5 �
When connecting a monaural VCR (for KV-J51PF2S only)
Connect the yellow plug to D and the black plug to � � L (MONO).
Connecting video equipment using the � (video input) jack
p KV-J14P2S
Front of TV
Connecting audio/video equipment using the
p KV-J14P2S
Camcorder to antenna socket
� (monitor output) jack
� D �
Rear of TV
�
to video and audio outputs
D
to antenna output VCR
�
�
to � (video input) D (video) and
� (audio) inputs
p KV-J51PF2S
� (monitor ouput) D (video) and � (audio) outputs
: Signal flow to antenna socket
to
to video and audio inputs
: Signal flow
p KV-J51PF2S
Front of TV
� D�
L (MONO) R
Rear of TV
Camcorder
R
�
L(MONO)
D
to antenna output VCR
�
to video and audio outputs to
÷�
KV-J14P2S/J51PF2S
to � (video input)
� (monitor ouput) D (video) and � (audio) outputs
to video and audio inputs : Signal flow
D (video) and � (audio) inputs
: Signal flow
When recording through the � (monitor output) jack
Do not change the channel or video input while recording with a VCR; otherwise the channel or video input you are recording also will be changed. Getting Started -EN
