|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
 ;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
2-10. PICTURE TUBE � REMOVAL OF ANODE-CAP
NOTE : After removing anode, short circuit anode of the picture tube and CRT. 4 C5 board
3 F board anode cap to metal chassis, CRT shield or carbon paint on the
� REMOVING PROCEDURES 7 Neck assy
2 A board
a
5 Deflection yoke a
6 Four screws
(Tapping screws) 1 Turn up one side of rubber cap in direction indicated by the arrow a.
b b
1 Anode cap
2 Using a thumb pull up rubber cap firmly in direction indicated by the arrow b.
c
� 25 �
Cushion 3 When one side of rubber cap is separated from anode button, the anode-cap
can be removed by turning rubber cap and pulling it up in direction of the arrow c.
Anode button
� HOW TO HANDLE AN ANODE-CAP
1 Do not damage the surface of anode-caps with sharp shaped objects. 2 Do press rubber too hard so as not to damage the inside of anode-cap. A metal fitting called shatter-hook terminal is built into the rubber. 3 Do not turn the foot of rubber over too hard. The shatter-hook terminal will stick out or damage the rubber.
KV-XF21M83/XF21M93
RM-952
|
|
|
> |
|
