I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
Text excerpt from page 12 (click to view)
KW-XC777
REFERENCE: Prior to performing the following procedures, turn the mode gear on the bottom of the body until the respective part comes to the EJECT position (Refer to Fig.1).
Removing the cassette guide (See Fig.2)
1. Turn the mode gear to set to RVS play or subsequent mode. 2. Remove the cassette guide from the main chassis while releasing each two joint tabs a in the direction of the arrow.
Cassette guide Mode gear
Fig.1
Tab a
Tab a
Fig.2
Removing the load arm (See Fig.3)
1. Remove the E-washer attaching the load arm.
Load arm
2. Move the load arm in the direction of the arrow and release the joint b on the cassette catch.
