|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
 ;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
 ;
Excellent!! Got what I need and very fast!! Thank You
 ;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
 ;
Service manual very complete and clear. It was very helpfull for my work.
- When using Ni-Cd batteries (250 mAh): Talk time: 4hrs approx. Standby time: 40hrs approx. (Times indicated are for peak performance) - The batteries reach peak performance after several full charge/ discharge cycles. - The batteries cannot be overcharged unless they are repeatedly removed and replaced. - If battery life is shortened then please check that battery and charge terminals are clean. - For maximum battery life, it is recommended that the handset is not recharged until battery icon flashes 4.4. Replacing the Batteries
If the icon flashes after a few telephone calls even when the handset batteries have been fully charged, 2 batteries must be replaced. Charge new batteries for approximately 7 hours before initial use. (The telephone line cord must not be connected to the telephone socket at this time). When replacing the batteries, ensure that the correct battery type is selected.
.
- To exit the operation, press any time. - Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and start charging, it may cause the leakage of the battery electrolyte.
Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.
6
|
|
 |
> |
|