|
There are currently no product reviews.
 ;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
;
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
5.4.6. RESET THE CAMERA TO THE FACTORY DEFAULT SETTINGS
The Network Camera has an CLEAR SETTING button which located back panel.
To Reset the Camera to the Factory Default Settings If any of the user settings or password were forgotten the Network Camera can be easily reset to the factory default settings. With power applied easily reset to the factory default settings. With power applied, press the "CLEAR SETTING" for about-1 second. The green LED on the front of the camera will first go out, and will blink for about 45 seconds during which time the pan-tilt motors will reposition themselves. The entire procedure takes about 1 minute. The reset is located on the rear of the camera and is accessed through the hole in the case using a pointed object. Caution:
When you press the CLEAR SETTING button, all buffered images are cleared.
6. DIAGNOSTICS
6.1. SELF TEST
The KX-HCM 10 checks its own hardware when the power turns on. The following table shows the contents of the check.
33
|
