PANASONIC KXTG2750S
Owner's Manual

If the Following Appear on Your Display...
If the unit detects a problem, one of the following messages will be displayed on the base unit or the cordless handset. Error beeps or a busy tone will sound. Display message Cause & Remedy � The battery needs to be charged. Recharge the battery (p. 12). � The battery has been discharged. The cordless handset will not work. Charge the battery fully (p. 12). � The cordless handset has lost communication with the base unit. Walk closer to the base unit, and try again. � Plug in the base unit�s AC adaptor. � Raise the base unit antennas. � The called unit is in use. � The Privacy mode is on for the call you tried to join (p. 41). � The unit you tried to send directory items to is in use. � The cordless handset you are calling is too far from the base unit. � The called cordless handset has not been registered to the base unit. � You selected your own extension number. � You pressed [9] instead of entering an extension number. Enter the extension number (0 to 8) to call. � When you tried to register or deregister the cordless handset, the cordless handset and the base unit could not link for some reason, such as interference from other electrical appliances. Move the cordless handset and the base unit away from electrical appliances and try again. � If more than one cordless handset is in use, you may not be able to register/deregister. Try again later. � Another unit tried to send directory items to you but the transfer has been stopped (p. 34, 35). � When you tried to store an item in the directory, the directory memory is full. Press [EXIT] on the base unit or [OFF] on the cordless handset to exit the programming mode. To erase other items from the directory, see page 33.

Recharge battery
(cordless handset only)

Charge for 15HRS
(cordless handset only) No link to base. Walk closer to base and try again. (cordless handset only)

Busy

Invalid

Error!!

Directory Full

56