There are currently no product reviews.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
System reset uses the power monitor IC to monitor the +5 V power supply to the main board. If the supply voltage reaches 4.75 V or above, after a time lag of approximately 180 ms due to the time constant of the R.C., the reset signal is changed from L -> H (RSTn). This signal is received by IC136, then input to the CPU (IC101), flash memory (IC102), RTC (IC128), the flash memory card (master) and the flash memory card (slave). To prevent current intake, IC136 uses the CMOS IC. Simultaneously, the reset signal (RST) inverted at IC109 is input to DSP IC120A (Ach), DSP IC120B (Bch), and gate array IC125. KX-TVS50-1 Reset IC Expanded Time Calculation Expanded time (tPLH) = CI � RL � (In (Vcc ÷ (Vcc - (Vs CPU + 0.2)))) + 0.04(ms) CL: F RL: k Voltage: V Vs CPU: CPU reset threshold voltage
Measured Value Graph 1
29
|