Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
Text excerpt from page 96 (click to view)
How to wash
Starting the programme
1. Check that the water tap is open. 2. Press START/PAUSE to start the programme. If the light starts blinking at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
At the end of the programme
The machine stops automatically. The (END) light comes on in the programme progress display. If the (RINSE HOLD) option has been selected, the START/PAUSE button goes off, the pilot light (END) on the programme progress display illuminates, the lights (DOOR) and . remain lit to indicate that the water must be emptied out. To empty out water there are two possibilities: � Select programme (drain): The water is emptied out without spinning. � Select programme (spin). Select the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed. Warning! The programme selector dial must be turned first to RESET O and then to the programme (drain) or (spin). Turn the selector dial to O to switch the machine off. Remove the laundry from the drum. Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. Close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
