I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 23 (click to view)
Operating Instructions
Starting the washing programme
0 1. Check that the water tap is open.
2. Start the washing programme: Press the START/PAUSE button The washing programme is started or starts at the end of the time delay set.
3
If the DOOR display flashes red when the START/PAUSE button is pressed, the door is not properly closed. � The display DOOR flashes red � The error code E40 then flashes in the multi display � And the MAIN WASH display flashes. In this case, press the door firmly closed and again press the START/PAUSE button. If the delay timer has been set: The start time delay set on the time delay counts down; the time remaining until the programme starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer. � Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again. � Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the programme duration is displayed (display in minutes e. g.126) the washing programme starts without delay.
