Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Text excerpt from page 42 (click to view)
Installation and connection instructions
2. Pull both hose holders off the unit with a strong pull.
3
The special key E and the caps D (2 each) and G (1 each) are supplied with it. 3. Unscrew the two screws with the special spanner. 4. Unscrew the 4 screws B with special spanner E. 5. Remove the transport rail C. 6. Screw the 4 screws B back in. 7. Close the 2 large holes with the caps D. Important! Press in the caps with sufficient strength so that they engage in the rear panel (protects the inside of the units against splash water). 8. Remove the screw F, including the compression spring, with the special spanner E. 9. Close the hole with the cap G. Important! Press in the cap with sufficient strength so that it engages in the rear panel (protects the inside of the unit against splash water).