perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 24 (click to view)
Operating Instructions
Starting the washing program
0 1. Check that the water tap is open.
2. Start the washing program: Press the START/PAUSE button The washing program is started or starts at the end of the time delay set.
3
The door is not correctly closed if, when the button START/PAUSE is pressed, � the error code Cd is shown in the multi-display and � the indicators PRE WASH, RINSE and RINSE+ flash In this case, press the door firmly closed and again press the START/PAUSE button. If the delay timer has been set: The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer. � Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again. � Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the program duration is displayed (display in minutes e. g.120) the washing program starts without delay.
