|
Who's Online
There currently are 5649 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
� CD 1. The tray rotates. 2. DISC 1 is chucked. 3. The TOC is read. 4. The first track is played for 2 seconds. 5. The last track is played for 2 seconds. 6. The tray rotates. 7. DISC 4 is chucked. 8. The TOC is read. 9. The first track is played for 2 seconds. 10. The last track is played for 2 seconds. 11. Repeated from step 1. � Display when ended abnormally When the tape deck is abnormal: The state when ended abnormally is displayed. The contents of display are the same as that during aging. When the CD player is abnormal: A message indicating that errors such as �CD MEC ERR� have occurred. Check the error contents in the following error history display mode. Error History Display Mode Mode which enables the history of error occurring in the CD player to be checked. Execute this mode after ending the aging mode. Procedure: 1. Press the "/1 button to turn the set ON. 2. Press the three buttons c/CLOCK SET , ENTER , and CD SYNC simultaneously. 3. A message such as �EMC@@EDC**� is displayed. @@ : Number of mechanical errors (Up to three past errors) ** : Number of errors (NO DISC ERROR) which occurs after chucking (Up to three past errors) 4. When checking the history of mechanical errors, press the PLAY MODE button. When checking errors after chucking, press the REPEAT button to switch the display. 5. Press the "/1 button to end and turn the set OFF. 6. To erase the error history, perform COLD reset. (Press the three buttons c/CLOCK SET , ENTER , and DISC 1 simultaneously. � Viewing the mechanical error history display (Switch the history by pressing the PLAY MODE button.)
7
$4.99 LBT-LX7 SONY Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|