|
There are currently no product reviews.
 ;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
;
Veramente completo, dettagliato e perfetto nella visione. Perfect, thanks!
LC-13B2U
TROUBLE SHOOTING TABLE
No Power (Power LED indicator still in red)
Go to the adjustment process mode.
1 +B-ADJ 255 MODEL B2U INCH SIZE 13 SYSTEM AUTO NTSC PWM FREQ OCO PAL PWM FREQ OBD NTSC PWM DUTY 0 PAL PWM DUTY 0 TV GAIN OFF ERROR NO RESET 5 V-CHIP 1 CANADIAN VCHIP OFF B2U VER 1.xx
Move the cursor to ERROR NO RESET and click on it (to reset to zero).
Turn off the power.
Is the power turned on again?
No
Check the back light lamp, D3601, Q3600, D3603 and their peripheral parts as well as pin (42) of IC2001.
Note: This model is equipped with the lamp error detection function that detects the current flowing into the fluorescent lamp and protects the backlight lamp drive circuit. If a lamp error is detected, the microprocessor interrupts the unit and the ERROR NO RESET setting will go up. When the ERROR NO RESET setting has reached "5", the microprocessor turns and keeps off the unit's power. To resume the power, take the above procedure to clear the ERROR NO RESET setting.
16
|
