THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
Good scan of the original service manual. All schematics and adjustment procedures are there. It helped me to fix a long lasting problem with the tracking circuitry. The manual also includes the supplementals 1,2 and 3. Included are; electrical schematic's , pcb layout's, mechanical drawing's and exploded views, disassembly manual and maintenance procedures. 236 pages.
The Service Manual received was helpful. The electronic information is exactly what I needed.
I recomend all of my friends about this technical page.
Text excerpt from page 6 (click to view)
LC-15A2M
REMOVING OF MAJOR PARTS
1. Insert your finger into the center of the terminal cover and pull it toward you to detach the terminal cover. 2. Remove the four screws 1 and one screw 2. 3. Open the cabinet B by approx. 45� from the bottom of the cabinet (stand side). 4. Remove the lead wire from the cable clamp 3. 5. Remove the power connector 4. 6. Remove the connector 5 from the light reception unit. 7. Remove the lead wire from the cable clamp 6. 8. Remove the speaker connector 7. 9. Remove the FFC from the FFC connector 8 on the Main Unit. 10. Remove the connector 9 from the Operation Unit. 11. Remove the right and left speaker connectors 0 on the Terminal Unit. <<Disassembly of the Main Unit>> 1. Disconnect the flexible cable connectors q and w from the LCD panel. 2. Disconnect the cable connectors e and r from the fluorescent lamp. 3. Remove the four screws t. <<Disassembly of the Terminal Unit>> 1. Remove the cover u. 2. Remove the five screws y. 3. Remove the two screws i. Take them out of the cabinet holes.