|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
LC-15B2U
3. Cancel of special mode
Turn off the main unit power.
4. Adjustments
Adjustment 1 B+ Adjustment (R3760) Adjusting conditions 1. Connect the DC voltmeter to pin 38 of SC3403. Adjusting method 1. Adjust the "B+ Adj" value to 5.0 ±0.02V with R3760.
2
Model and Inch Size setup (If E2PROM is replaced) (IC2004)
1. Go to the adjustment mode.
1. Select "MODEL" with [MENU] key and adjust to "B2U" with [VOL+] or [VOL-] key. * The color of "MODEL" must be yellow. 2. Select "INCH SIZE" and adjust to "15" with [VOL+] or [VOL-] key. * The color of "INCH SIZE" must be yellow.
3
Counter-bias adjustment
1. Receive a B/W channel. 2. Go to the adjustment mode. 3. Select the "COM BIAS" with [MENU] key.
1. Adjust "COM BIAS" to the darkest screen with [VOL+] and [VOL-] key. * The color of "COM BIAS" must be yellow.
4
Checking and modifying the settings (after replacing the E2PROM)
1. Go to the adjustment mode and check the following settings. » PRE SCALE FM/AM-M » PRE SCALE SCART » » » » » » » » » » TV GEQ BAND 1 TV GEQ BAND 2 TV GEQ BAND 3 TV GEQ BAND 4 TV GEQ BAND 5 EXT GEQ BAND 1 EXT GEQ BAND 2 EXT GEQ BAND 3 EXT GEQ BAND 4 EXT GEQ BAND 5 17 15 +1.0 +1.0 -1.0 -2.0 -2.0 +1.0 +1.0 -1.0 -2.0 -2.0 29
1. See if all the settings are as specified. If not, select an item in question with [VOL+] or [VOL-] key and adjust the setting as shown at left. * An item selected will be highlighted in yellow.
» VSYNC DELAY
14
|
|
|
> |
|
