|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
EXAMPLE OF APPLICATION
Mounting the LCD monitor on a wall
Note: I Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materials may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)
1 2
Drill holes measuring 0.3 in. (8 mm) in diameter on the wall (hollow wall, plaster board). Insert the supplied anchors into the holes, and strike the heads of the anchors with a hammer until the anchors are securely installed in the wall.
1.6 in. (40 mm)
0.3 in. (8 mm) ø
Note: I The supplied anchor screws are inserted in anchors. Remove the screws from the anchors before installation.
Anchor Screw (Supplied) 0.5 in. (12.5 mm)
3
Position the supplied wall mount bracket in place using the anchor screws. Tighten the anchor screws securely. CAUTION: � The wall mount bracket must be installed with four anchor screws. Be sure to thighten so that it will not fall down under a pulling force of at least 44 lbs (20 Kg). � The anchors are designed for plaster boards with a thickness of 0.5 in. (12.5 mm). For a 0.4in. (9.5 mm) thickness board or a wooden wall, find similar anchors or screws at a hardware store.
Wall Mount Bracket (Supplied)
Anchor (Supplied)
4
Mount the back stand of the main unit on the wall mount bracket with the supplied fixed screw.
Wall Mount Bracket (� 1)
Anchor and Screw (� 4) * To change the vertical angle of the monitor, tilt the screen up to 8° downward. Adjust the angle of the monitor for the most comfortable viewing. Fixed Screw (� 1) (Supplied)
24
LC-15M4U(20-28)Eng.p65 24 01.9.18, 10:18 AM
4.3 in. (110 mm)
|
|
|
> |
|
