|
There are currently no product reviews.
 ;
This manual is all I need to check and repair my equipment. Thank you....
;
This manual is all I need to check and repair my equipment. Thank you....
;
This manual is all I need to check and repair my equipment. Thank you....
;
this manual make me repair my vintage radio with easily.
Thank you for your best service
sukpra
;
A good manual. Had everything i needed to make the repair.
LC-37HV6U
Noise is caused to the moving picture when the QS drive is set to ON.
Is OSTEMP.AD on the 3rd page of the process adjustment mode set to 255? YES Is the harness connected correctly between the Thermistor PWB and Inverter-4 PWB? YES Is the board-to-board connected correctly between the Inverter-3 PWB and Inverter-4 PWB? YES Is the harness connected correctly between the Monitor PWB and Inverter-3 PWB? YES Is the input voltage on pin (2) of IC2004 (microprocessor) 5V? YES TH6301 thermistor is faulty.
No
Check IC4701 and IC4901 and the peripheral circuitry.
No
Connect the harness correctly or replace it.
No
Connect the board-toboard securely or replace it.
No
Connect the harness correctly or replace it.
No
Pin (2) of IC2004 (microprocessor) is faulty.
51
|
