|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Lint screen
The lint screen is inside the dryer drum, on the back wall. Clean it before each load. A screen blocked by lint can increase drying time. 3. Roll lint off the screen with your fingers. DO NOT rinse or wash the screen. Wet lint is hard to remove.
Pull straight out.
Squeeze body; pull cover off.
1. Use the finger holes to pull the lint screen straight out. 2. Lightly squeeze the body, as shown, while pulling the cover off.
4. Replace the cover on the body of the lint screen. 5. Push the lint screen straight back in until it clicks into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. this lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.
ELECTRIC
DRYERS
GAS DRYERS
eaning should
be done only by a qualified
person.
1. Remove back panel (electric) or lower access panel (gas]. 2. Avoid damaging wires, thermostats, funnel or igniter. 3. Remove lint from shaded area see art-with a soft brush or vacuum cleaner. 4. Replace panel; reconnect and re-level dryer.
|
|
|
> |
|
