|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Timed
Drying
Cycle
TUMBLE
PRESS�
Feature
Use the Timed Drying cycle (high, medium, or low heat) to complete drying if some items are damp after Automatic drying. Timed Drying is also useful for: Delicate items and small loads that need l a short drying time.
l
The TUMBLE PRESS feature in the Timed Drying cycle removes wrinkles from clothes that have been packed in a suitcase or closet, or from items not removed from the dryer at the end of a cycle. As soon as the dryer stops, fold or put the items on hangers.
Bulky items and large loads that require a long drying time.
Fluff
Air Cycle
Damp
Dry Feature
Use the Damp Dry feature in the Timed Drying cycle to dry items to damp level, or to dry items that do not require an entire drying cycle. Two examples are heavy cottons, such as jeans, which you do not want to become stiff, or cotton clothes which are easier to press when damp.
The Fluff Air cycle has no heat. Use this unheated cycle to fluff or air dry bedding, plastic tablecloths, foam pillows, sneakers, etc. See page 10 for more information about the Fluff Air cycle.
FINISH
GUARD@
feature
When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. The FINISH GUARD feature tumbles the load without heat every few minutes up to 45 minutes after the cycle ends. This tumbling rearranges and fluffs the load to avoid wrinkles. The FINISH GUARD feature is available in all of the Automatic cycles and the Timed Drying cycle. Simply turn the FINISH GUARD Selector to On or Off. If the Selector is On and you do not open the dryer door within a few minutes after the cycle stops, the FINISH GUARD feature takes over to protect the load. A signal sounds every few minutes when FINISH GUARD is running. The signal and cycle stop when you open the dryer door.
FInIshQuad
|
|
|
> |
|
