This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
Fantastic quality and impressive delivery time. Based on this manual, I recommend this service without hesitation! Five Stars for certain.
Text excerpt from page 12 (click to view)
Using
(on some
the drying
models)
rack
4. Select the Timed drying cycle (and temperature, if needed) or the Fluff Air cycle (see page 7). 5. Push the Start Button.
The drying rack lets you dry items that you may not want to tumble. The rack does not move, but the drum turns. 1. Fit rear legs of the rack into indentations -in the back wall of the dryer. Lower the front so the legs rest on the dryer opening.
2. Put wet items on top of the rack. Leave space between the items so air can reach all surfaces. NOTE: Make sure nothing hangs over the edge of the rack. 3. Close the door.
q
11
(Block to shape and lav flat on the rack) Stuffed toys or pillows (Cotton or polyester fiber filled) Stuffed toys or piiiows (Foam rubber filled) Sneakers or canvas shoes
� Reset cycle as needed to complete drying.
NOTES: l See the chart below for suggested cycles and settings for the different types of items that might best be rack dried. . The rack must be removed for normal tumbling. l Drying time will depend on how much moisture the items hold. The following chart suggests drying times.
I CYCLE I
Timed
TEMPERATURE
LOW or EX LOW
TIME* I (minutes)
60
Timed Fluff Air
LOW or EX LOW None; cycle is unheated.
60
90
30-40
Lint signal
(on some models)
NOTE: Clean your lint screen before each load. Do not wait for the lint signal. The lint signal (a whistle tone) indicates excessive lint is present on your lint screen. A full lint screen restricts airflow and reduces drying efficiency. When you hear the signal, stop the dryer and clean the lint screen. 12