WHIRLPOOL LER8857EZ2
Owner's Manual

CARING FOR YOUR DRYER

CHANGING THE DRUM LIGHT
The dryer light automatically turns on inside the dryer drum when you open the door. Your dryer�s drum light may be one of two types, as shown.

wWARNING

Fire Hazard

Replace light bulb cover before operating dryer. Failure to do so can result in death or fire.

To change drum light type 1:
1. Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply. 2. Open the dryer door. Remove the light bulb cover from the back wall of the dryer by turning the cover clockwise.

To change drum light type 2:
1. Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply. 2. Open the dryer door. Remove the light bulb cover from the back wall of the dryer by removing the screw located in the lower right corner of the cover.

3. Remove the light bulb by turning it
counterclockwise. 4. Replace the bulb with a 40-watt appliance bulb only. 5. Replace the light bulb cover and lock in place by turning counterclockwise.

3. Remove the light bulb by turning it
counterclockwise. 4. Replace the bulb with a 10-watt appliance bulb only. 5. Replace the light bulb cover.

6. Plug in dryer or reconnect power supply.

6. Plug in dryer or reconnect power supply.

17