|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very helpful, correct shematic diagram, and good exploded view.Perfect!
;
Alte gescannte Servicepläne sind oft doch etwas undeutlich . Stromlaufpläne werden auf mehrere DIN A4 Seiten aufgeteilt. Alles ziemlich umständlich und zeitaufwendig. Aber mit etwas Mühe geht alles.
 ;
Great item, high resolution, detailed, very easy to work with.
;
fast delevery of the manual and very complete manual, now my Akai works again, will buy again, thanks.
;
Tartalma megfelelő. Szebb kivitelű is lehetne a scannelés.
4097-00X
Rear Cover Removal
1. Open the rear cover. 2. Push the mounting tabs toward the center of the machine and remove the rear cover.
Sheet Feeder Removal
1. Remove the front cover. 2. Remove the carrier frame. 3. Remove the two screws that hold the sheet feeder to the carrier frame. 4. Remove the screw from the gear plate. 5. Depress the sheet feeder latch from the carrier frame and remove the sheet feeder.
Small Feed Rollers / EOF Removal
1. 2. 3. 4. 5. Remove the front cover. Remove the carrier frame. Remove the sheet feeder Facing the rear of the machine, remove the small feed rollers. Unhook the four small feed roller springs from the carrier frame and remove the small feed roller assemblies. 6. Slide the EOF flag to the right and remove. Note the positioning of the tension spring.
System Board Removal
Remove the front cover. Remove the carrier frame. Disconnect all connectors from the system board. Remove the four system board screws from the system board. Note when removing the system board, be careful not to damage the end of form EOF flag. 5. Remove the system board. 1. 2. 3. 4.
4-8 Service Manual
|
|
|
> |
|
