|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Using Your Dryer
1.
2.
l
Put the sorted load In the dryer and close the door tightly. Turn the Cycle Control the cycle you want. Knob to
Use the Automatrc Cycles for most loads. Start wrth the pornter at the mrddle of an Automatrc Cycle. See page 6 for more informatron. Cycles, the Cycle Control Knob does not keep moving. It starts and stops, depending on the heat and the dryness of the load.
NOTE: In the Automatic
-1
2
l
Use TIMED DRYING for drying a certain number of minutes, or for damp drying. fluffing, or tumbling items without air.
Setting Drying Times Modern dryers are designed with drying temperatures needed to safely handle modern fabrics. Cooldown times have been added to heat settings. You might notice slightly longer drying times. The time it takes to dry a load depends on:
3.
l
Set TEMPERATURE SELECTOR.
Turn the TEMPERATURE SELECTOR to for the
temperature needed load. See page 5 for suggested settings.
the drying
4.
l
Push the Start Button.
Make sure the door is closed and the Cycle Control is set. If the door IS opened during the cycle, the dryer will stop. To restart the dryer, close the door and push the Start Button.
0 The kind of fabric, its weight, and the size of the load. A large load of jeans
will take a lot longer to dry than small load of light synthetics. a
0 The amount
of moisture
in the load.
synthetics
Towels hold a lot of moisture; don�t. Synthetics dry faster.
l
5.
l
To stop the dryer:
Control Knob to one
Open the door. l Or, turn the Cycle of the OFF positions.
l
To change the setting while dryer is running, turn the Cycle
the
Knob, either way. so it points ting you want.
Control to the set-
Cold rinses help save on energy and wrinkles, but a cold load will take slightly longer to dry than a warm one. l Amount of linf on the screen. A full lint screen slows the air flow and can make drying time longer. l Temperature around the dryer. The dryer heats room air. If the room air temperature is not above 45°F (7.2�(Z), drying time will be longer and removal of wrinkles may be poor.
Temperature
of the rinse water
0 Proper instollotion tems. For the fastest
IMPORTANT: To help reduce wrinkling, take the load from the dryer as soon as tumbling stops. This is very important and other for permanent press, synthetic fabrrcs. knits time, dryer lation
and exhaust
possible
sys-
drying
installing and exhausting your properly is important. See instalinstructions.
4
|
|
|
> |
|
