1-2. Connection of headphones (commercially available)
Headphones (commercially available) can be connected.
1-4. Turning the power on
1. Press the monitor's POWER button. 2. Turn on the computer. The power LED will be lit green, and the screen will display an image.
Headphone terminal
Turn on the computer Headphone ON
Note: When the headphones are connected, no sound can be heard from the monitor speakers. Note:
Press power button
1-3. Connecting the monitor to a power source
1. Connect the AC adapter to the monitor's power terminal.
� When using an analog signal, perform an automatic screen adjustment under the following conditions: � Using the monitor for the first time. � After having changed the system settings during use. � Depending on the computer or OS, it may be necessary to use the computer to install monitor set-up information. If so, follow the steps below to install the monitor set-up information. � When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the MS-DOS screen may not be able to display properly. In this case, change the settings so that only the monitor is displaying.
Power terminal
AC adapter
1-5. Changing between input terminals
Use the INPUT button to switch between signal input terminals. 2. Attach the power cord to the AC adapter and place the power plug into the AC outlet.
Analog RGB input terminal
DVI-I input terminal
INPUT AC outlet INPUT-1 <ANALOG> < INPUT-2 >
The input signal type (ANALOG/DIGITAL) is displayed within angle brackets < >.
Note: When there is no input signal, [NO SIGNAL] is displayed.
Power cord
1-6. Turning the power off
1. Turn the computer off. 2. Press the monitor's POWER button. The Power LED will disappear.
Turn the computer off OFF
Press power button
If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet.
LL-T17D3-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2�2
