|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
 ;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
L-RS014150PP / L-RS014150E
5.2.3.
Removal of the Lens Mount U
5.2.4.
Removal of the Decoration Ring
--- WHEN DISASSEMBLING / ASSEMBLING ---*.When removing and installing the "Screw (B)", use a VFK1390. Otherwise, Lens Mount u may be damaged. --- WHEN ASSEMBLING ---*.When assembling, do not reuse screws (D). (Use new one.) *.Tighten the 4 screws (C) and (D) in numerical order.
--- WHEN DISASSEMBLING ---*.Since the Decoration Ring which is stick on Lens Ring Front, Apply the heating air using Hair dryer. *.Peel off the Decoration ring by inserting the minus-driver between the Decoration Ring and Lens Ring Front. (Be careful not to damage the surface of the lens and/or Lens Ring Front.) --- WHEN ASSEMBLING ---*Do not use the removed (Used) Decoration Ring. Use new one. *.Peel off the Decoration Ring from the separator sheet. *.Stick the Decoration Ring to the Lens Ring Front that concave part to be toward the "X" direction. *.Press the Decoration (RFKZ0423) Ring with Name Ring Fixture
12
|
|
|
> |
|
