|
There are currently no product reviews.
 ;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
3.1.8 REMOVING THE POWER PWB � Remove the STAND. � Remove the REAR COVER. � Remove the FAN BRACKET. � Remove the POWER CORD. � Remove the RECEIVER PWB. (1) Remove the 4 screws [X], and remove the AV JACK BRACKET. (2) Remove the 6 screws [Y], and remove the POWER PWB. (3) Remove the 6 screws [Z], and remove the CHASSIS BASE.
Y
Y
POWER PWB
P Q
AV JACK BRACKET
Z
CHASSIS BASE
X
Z
Fig.3-1-8 3.1.9 REMOVING THE SPEAKER � Remove the STAND. � Remove the REAR COVER. � Remove the POWER CORD. (1) Remove the 5 screws [a], and remove the SPEAKER BOX.
a
SPEAKER BOX
a
Fig.3-1-9A (2) Remove the 4 screws [b], and remove the SPEAKER (L / R). (3) Remove the 4 screws [c], and remove the DUCT COVER/ DUCT BASE. NOTE: Since the speaker is attached in a certain direction, attach the speaker in the same correct direction as it has been attached.
SPEAKER(L)
b
DUCT BASE/DUCT COVER
c
c
b
SPEAKER(R)
Fig.3-1-9B
(No.YA003)1-15
|
