|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast delevery of the manual and very complete manual, now my Akai works again, will buy again, thanks.
 ;
Tartalma megfelelő. Szebb kivitelű is lehetne a scannelés.
;
I never been disappointed in my dealings with owners-manuals.com
;
Excellent printing quality. A complete and very useful manual with all details.
;
Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
3.1.10 REMOVING THE SPEAKER (Fig.2) � Remove the STAND. � Remove the REAR COVER. (1) Remove the 7 screws [A], then remove the SPEAKER BOX. (2) Remove the 4 screws [B], then remove the SPEAKER (L /R). (3) Remove the 8 screws [C], then remove the DUCT(L/R). NOTE: Since the speaker is attached in a certain direction, attach the speaker in the same correct direction as it has been attached. 3.1.11 REMOVING THE LCD PANEL UNIT (Fig.2) � Remove the STAND. � Remove the REAR COVER. � Remove the FAN BRACKET. (1) Remove the 4 screws [D], then remove the MAIN BASE. (2) Remove the 5 screws [E]. then remove the LCD PANEL UNIT with the TOP FRAME and BOTTOM FRAME. (3) Remove the 4 screws [F]. then remove the TOP FRAME and BOTTOM FRAME from the LCD PANEL UNIT.
3.1.12 REMOVING THE FRONT SENSOR PWB (Fig.2) � Remove the STAND. � Remove the REAR COVER. � Remove the FAN BRACKET. (1) Remove the 2 screws [G], then remove the FRONT LED PWB. 3.1.13 REMOVING THE LED LENS (Fig.2) � Remove the STAND. � Remove the REAR COVER. � Remove the FAN BRACKET. (1) Remove the 2 screws [H], then remove the LED LENS.
1-10 (No.YA379)
|
|
|
> |
|
