HUSQVARNA LTH1536
Owner's Manual

OPERATION
MOWING TIPS
� � � Mower should be properly leveled for best mowing performance. See �TO LEVEL MOWER HOUSING� in the Service and Adjustments section of this manual. The left hand side of mower should be used for trimming. Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting. When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until �nished (See Fig. 8).

�

FIG. 8 � If grass is extremely tall, it should be mowed twice to reduce load and possible �re hazard from dried clippings. Make �rst cut relatively high; the second to the desired height. Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired. When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

� �

�

14