Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 27 (click to view)
Something not working?
If the tumble dryer is not working correctly please carry out the following checks before calling out an engineer.
Symptom Possible cause The appliance is not plugged in The fuse has blown The START/PAUSEbutton has not been pressed The tumble dryer will not start No program has been selected The door is not properly closed The water reservoir is full The wrong program has been selected Fluff filter blocked Condenser unit covered with fluff The tumble dryer has been overloaded The results are unsatisfactory Laundry not sufficiently spun prior to tumble drying The vent in the base of the appliance is covered A residue may have formed on the drum interior, blocking the sensors Select the required program Close the door Empty the water reservoir Select a different program Clean the fluff filter Clean the condenser unit Observe the maximum loads stated for each program Ensure the wash load is well spun before tumble drying Ensure the vent is clear Solution Plug in the appliance Check the fuse Press the START/PAUSE button
