5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 34 (click to view)
Operating Instructions
Carrying out an emergency emptying
� If the washing machine no longer pumps out the water, emergency emptying must be carried out. � If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.
1
Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying. Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying. 0 1. Have a flat container on hand to catch the water. 2. Pull down the flap in the right corner of the base strip outwards and pull it off.
3. Remove the emergency emptying hose from its holder.
4. Place the container under the hose. 5. Detach the plug of the emergency emptying hose by turning it anticlockwise and pull it out. The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several times. To do this, close the emergency emptying hose temporarily with the plug. Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose. 34
