|
Who's Online
There currently are 5825 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
;
Hr, klasse , good manual, verry fast on my e-mail, very usefull manual. rgds; ahm zeegers
USER�S GUIDE 2482/2600
General Guide
� Press B to change from mode to mode. Timekeeping Mode Alarm Mode � After you perform an operation in any mode, pressing B returns to the Timekeeping Mode. � In any mode, press A to illuminate the display. Stopwatch Mode Time Setting Mode
Press
.
[Modules 2482, 2600]
Timekeeping Mode
PM indicator Day of the week Day
Stopwatch Mode
� In the Timekeeping Mode, press C to switch � between 12-hour format, the P (PM) indicator appears to With the the 12-hour and 24-hour formats. the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. � With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24 indicator. � Day of the week is displayed as follows. SU: Sunday TU: Tuesday TH: Thursday SA: Saturday MO: Monday WE: Wednesday F R : Friday
Mode indicator Minutes Seconds
The Stopwatch Mode lets you measure elapsed time, split times, and two finishes. The range of the stopwatch is 59 minutes, 59.99 seconds.
Hour
Minutes
1/100 second
Seconds
Split time indicator
Backlight Precautions
The backlight uses an EL (electro-luminescent) panel that causes the entire display to glow for easy reading in the dark. � The electro-luminescent panel that provides illumination loses power after very long use. � The illumination provided by the backlight may be hard to see when viewed under direct sunlight. � The watch may emit an audible sound whenever the display is illuminated. This is due to vibration of the EL panel used for illumination, and does not indicate malfunction. � Frequent use of the backlight shortens the battery life.
(a) Elapsed time measurement Start Stop Re-start Stop Clear
(b) Split time measurement Start Split
(SPL displayed)
Split release
Stop
Clear
(c) Split time and 1st-2nd place times Start Split
First runner finishes. Display time of first runner.
Stop
Second runner finishes.
Split release
Display time of second runner.
Clear
Alarm Mode
Mode indicator Hour Minutes
When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset time each day. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour.
� Pressing A also illuminates the display.
To set the alarm time
1. Hold down A while in the Alarm Mode until the hour digits start to flash on the display. The hour digits flash because they are selected. � This operation automatically turns on the alarm.
Hourly time signal on indicator Alarm on indicator
Time Setting Mode
PM indicator Day of the week Day
To set the time and date
1. Use B to enter the Time Setting Mode. � The second�s digits flash because they are selected. 2. Press A to change the selection in the following sequence. � Pressing A also illuminates the display.
Seconds Day of week
Hour Day
Minutes Month
2. Press A to change the selection in the following sequence. � Pressing A also illuminates the display.
Hour
Minutes
Hour Minutes Seconds
Normal Alarm Mode (No digit flashes)
3. Press C to increase the selected digits. Holding down C changes the number at high speed. � The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping. � When setting the alarm time using the 12-hour format, take care to set the time correctly as morning or afternoon (P). 4. After you set the alarm time, press A to return to the Alarm Mode.
To stop the alarm
Press A to stop the alarm after it starts to sound.
3. While the second�s digits are selected (flashing), press C to reset the seconds to �00�. If you press C while the second�s count is in the range of 30 to 59, the seconds are reset to �00� and 1 is added to the minutes. If the second�s count is in the range of 00 to 29, the minute�s count is unchanged. 4. While any other digits (besides seconds) are selected (flashing), press C to increase the number. While the day of the week is selected, pressing C advances to the next day. Holding down C changes the current selection at high speed. 5. After you set the time and date, press B to return to the Timekeeping Mode. � If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.
To switch the Daily Alarm and Hourly Time Signal on and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly Time Signal in the following sequence. [Alarm on Indicator/Hourly Time Signal on Indicator]
Both on
Both off
Daily Alarm only
Hourly Time Signal only
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
1
|
|
|
> |
|