|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
 ;
This is a great and complete Service Manual for the Sharp GF8585HB. Giving full and detailed technical insight. Good to find these manuals online.
2-1
2-1
DISMANTLING INSTRUCTIONS
Dismantling of the Tuner Board and Main Board and AVC Board Dismantling of the Tuner Board and Main Board and AVC Board
1) Loosen 6 screws A to remove the Cover Top (pos 260). - 2 screws each on the left & right side (see Figure 1) - 2 screws on the rear (see Figure 2) - See Service position A
2) Remove 3 screws B and uncatch 2 catches B1 (see Figure 2) to loosen the Tuner Board (pos 1101).
3) Remove the Bracket PCB Mains (pos 259) by pressing the catch C1 inward and slide it up in the direction as shown in Figure 3.
4) Remove 1 screw C (see Figure 2) and uncatch 2 catches C2 (see Figure 4) to loosen the Main Board (pos 1104-B). - See Service position B
Figure 3
Figure 1 5) Remove 2 screws G (see Figure 4) to loosen the Bracket AV PCB (pos 255). 6) Remove 6 screws E and 2 screws F (see Figure 2) to loosen the Plate Rear (pos 251) and AVC Board (pos 1102). - See Service position D
Figure 2
Figure 4
|
|
|
> |
|
