|
There are currently no product reviews.
 ;
Great product, very good quality, found all needed information. Thanks
;
Excellent quality, helped to fix problem. Thank you very much!!!!
;
I thank Owner-Manuals.com for providing the necessary manual very quickly, and it was very helpful in repairing my personal Audio System and I once again thank them for the wonderful customer's service satisfaction.
Thanks.
;
Everything fine: quick service, no glitch and above all a very good quality of the Pdf file. Thank you!
;
The manual was complete, parts list, adjustment procedures, etc. No worries
LZ-701W
ADJUSTMENT
Common Electrode Drive Signal Level Adjustment *After leaving the system in a 40O C thermostatic oven for more than an hour, perform the following adjustments inside the thermostat oven. *Use the specified video (obtained by entering pause mode in the first scene in Chapter 2 of DVD "HAWAII") for the adjustments. 1. Set the video mode to ZOOM and adjust SVR701 to minimize flickering. 2. Set the video mode to CINEMA and make sure that the flickering characteristic is not deteriorated. 3. Leave the system in a 60OC thermostat oven for more than an hour, display the specified video inside the oven and make sure that the flickering characteristic is not deteriorated. Horizontal Line Adjustment in Vertical Expansion Mode *After completing the common electrode drive signal level adjustment, perform the following adjustments in the same oven and using the same video. 1. Set the video mode to ZOOM and adjust SVR702 to obtain the best horizontal line. 2. Set the video mode to CINEMA and make sure that the horizontal line is not deteriorated.
The step durations should be identical
Video signal
White level
1.8 ~ 2.0 1.6 ~ 1.8 1.2 ~ 1.4 VBW
VBB
0.6 ~ 0.8 Black level VBW : Voltage across black and white VBB : Voltage across black and black
Figure 1
7
|
