perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 22 (click to view)
Operating Instructions
Washing Cycle Complete/Removing the Washing
The washing program normally ends with the final spin. After a rinse hold: After a rinse hold the water must first be pumped out or the washing spun: 0 1. Release the RINSE HOLD button. 2. Either turn the program selector clockwise to SPIN or SHORT SPIN (the washing is spun according to the selected program and the spin speed set) or turn the program selector clockwise to PUMP OUT (the water is pumped out). Once the program is finished: For safety reasons, the door remains locked for 1-2 minutes after the end of the program. 0 1. Open the door. 2. Remove the washing. 3. Press the ON/OFF button. The indicator extinguishes, the washing machine is switched off. 4. Close the water tap. 5. Pull out the detergent dispenser drawer a little so that it can dry out. Leave the door ajar for a while. This helps to prevent stagnant smells and helps to preserve the door seal. Important! If the washing machine is not to be used for a long period: close the water tap and isolate the washing machine from the mains.
