Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
Text excerpt from page 25 (click to view)
Something not working?
Something not working?
If the tumble dryer is not working correctly please carry out the following checks before calling out an engineer.
Symptom Possible cause The appliance is not plugged in The fuse has blown Solution Plug in the appliance Check the fuse
The STARTbutton has not Press the START button been pressed The tumble dryer will not start No program has been selected The door is not properly closed The water reservoir is full The wrong program has been selected Fluff filter blocked Condenser unit covered with fluff The tumble dryer has been overloaded The result are unsatisfactory Laundry not sufficiently spun prior to tumble drying The vent in the base of the appliance is covered A residue may have formed on the drum interior, blocking the sensors Select the required program Close the door Empty the water reservoir Select a different program Clean the fluff filter Clean the condenser unit Observe the maximum loads stated for each program Ensure the wash load is well spun before tumble drying Ensure the vent is clear
