Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 8 (click to view)
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle�s ignition and it was not switched off using button 2, it will switch on/off simultaneously with the ignition. Switching on/off using the removable control panel
ADJUSTING THE VOLUME
Adjusting the volume
The system volume can be adjusted in steps from 0 (off) to 100 (maximum). To increase the system volume,
� turn the volume control 3 clockwise. To decrease the volume, � turn the volume control 3 anticlockwise.
Setting the power-on volume
You can set the unit�s default power-on volume.
� Remove the control panel.
The unit switches off.
� Attach the control panel again.
The unit switches on. The last settings i.e. radio, CC or CD changer (CD changer only with the Lexington C32) will be reactivated. Switching on/off using button 2
� Press the MENU button 8. � Keep pressing the or button
8 until �ON VOL� appears in the display.
� Set the power-on volume using the
and buttons 8. To help you adjusting the volume more easily, the volume will be increased / decreased as you make your changes. When you have finished making your changes,
� To switch the unit on, press button
2. The unit can only be switched on when the ignition is turned on.
� To switch the unit off, press button
2 for longer than two seconds. The unit switches off.
� press the MENU button 8 twice. Instantaneously reducing the volume (mute)
You can instantaneously reduce the volume (mute) to a level preset by you.
� Briefly press button 2.
�MUTE� appears in the display.
