|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
MC-45 & MC-50
Service Service Service
A02 - 154
Product Service Group CE Audio
Service Information
Already published Service Informations: A01-164 3139 785 30023
CHANGES DURING PRODUCTION FRONT CONTROL BOARD * From production wk204 onwards the following changes are made to improve brightness & reliability of the Blue LED. 3601 change to 33R 5% 0,062W 4822 051 30339 3602 change to 33R 5% 0,062W 4822 051 30339 ETF TAPE MODULE * From production wk209 onwards a new ETF8 SD Tape Module was introduced replacing the existing ETF6-LE Tape Module. Due to this change the undermentioned changes needs to be implemented together: On the Front Board 7102 is change to 9965 000 11077 TMP88PU74YF. This is the OTP version of new IC which can be recognized by the "MC50S52881" printed on the body of the IC. On the Center Unit (Refer to Set Exploded view) Pos 198 is change to 3139 114 73930 Door Cassette A new Chapter of the ETF8 Tape Module is enclosed. It can be recognized by the the printing mark 3139_113_34552_01 on the pc board. 3DTC MODULE * From production wk205 onwards a new pc board pt. 5 is introduced due to the addition of a HF detection circuitry
for other set application. Because the existing module has dedicated circuit diagram for this set, no changes is required on the circuit. Enclosed is the new pt.5 layout. COMBI BOARD * From production wk202 onwards a new pc board pt. 2 is introduced to improve GSM immunity & cater for other set application. Due to this new board the following changes are made: 2542 change to 1nF 10% 50V 4822 122 33197 2543 change to 1nF 10% 50V 4822 122 33197 Add 2650 220pF 50V 4822 126 13883 Add 3673 470R 5% 0,1W 4822 051 30471 Add 3674 470R 5% 0,1W 4822 051 30471 Add 4549 0R Jumper 0805 4822 051 20008 Add 5511 Ind. fxd 100MHz 600R 2422 549 44607 Add 5512 Ind. fxd 100MHz 600R 2422 549 44607 The new pt.2 layout & affected circuitry are enclosed for reference. REGULATOR BOARD * From production wk212 onwards a new pc board pt. 4 to improve MW/LW sensitivity & noise for other application sharing the pc board. Added on the board are components 2417 and 2420. The silkscreen printing on the pc board is later changed to pt. 5 to correct item 3433 & 3434 interchange error. The new pt.5 layout & circuitry is enclosed for reference.
2002 - 04 - 26
3139 785 30061
 $4.99 MC50 PHILIPS
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
