Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 12 (click to view)
Clearance Height
A minimum clearance height of 700mm (27 1/2 �) is required when installed above an electric hob, or 750mm (29 1/2 �) when installed above a gas hob. When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm a gap of 50mm must be maintained either side of the hob. This cooker hood must not be installed above a cooking appliance with a high level grill. The hood can be installed above these heights but for optimum performance it should be installed at the distance quoted for the appropriate heat source.
700mm 750mm 735mm 837mm
Unpacking
The fittings supplied to install this cooker hood can be found with the instruction book inside the packaging and consists of the following: 1 chimney support 1 Connection ring � 123 16 screw covers 6 Plastic rawl plugs � 6 mm 6 Screws 3, 9x32 6 Screws 3, 5x9, 5
