Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
� If the POWER NOZZLE is attached, turn cleaner off before removing handle from wands. � Press lock button, then pull to remove handle from wand. � Slide attachments firmly onto handle as needed (See page 28). ATTACHMENTS ON WANDS � If the POWER NOZZLE is attached, turn cleaner off before removing plug from wands. � To remove wands from POWER NOZZLE, lock wands in upright position. � Remove POWER NOZZLE plug and cord from holders. � Unplug the cord. Steady POWER NOZZLE with foot and turn wand counter-clockwise until lock button disappears, then pull wands out of POWER NOZZLE. � Put attachments on wands as needed (See page 28).