|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
 ;
It is an very good and clear scanned service manual.
very recommended.
 ;
Easy to order the manual. Good quality and fast delivery.
DISC REMOVAL METHOD AT NO POWER SUPPLY
1. Remove the Back Cabinet and AV PCB/DVD Block. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Slide the Rack Loading (White) toward the arrow direction by using a minus driver to release the lock. (Refer to Fig. 1) 3. Draw the Tray.
Rack Loading (White) Deck CD
Fig. 1
PARENTAL CONTROL - RATING LEVEL
4 DIGIT PASSWORD CANCELLATION
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. 1. 2. 3. 4. 5. 6. 7. 8. Turn Unit ON. Set the DVD to the Stop Mode. Set the VOLUME to minimum. Press and hold the 'VOL. DOWN' button on the front panel. Simultaneously press and hold the '4' key on the remote control unit. Hold both keys for more than 1 second. The On Screen Display message 'INITALIZE5 COMPLETE' will appear. The 4 digit password has now been cleared.
NB: The above procedure will reset ALL of the player's settings to the default factory state.
TRAY LOCK
Tray cannot be opened by setting the Tray Lock, please follow the steps below. 1. 2. 3. 4. 5. 6. Turn Unit ON. Set the DVD to the Stop Mode. Press and hold the '9' key on the remote control unit. Simultaneously press and hold the 'STOP' key on the front panel. Hold both keys for more than 3 seconds. Press the OPEN/CLOSE key on the front panel to check the Tray Lock setting.
NB: No indications on the screen when the Tray Lock is setting. To unlock the Tray Lock, please follow the steps below. 1. 2. 3. 4. 5. 6. 7. 8. Turn Unit ON. Set the DVD to the Stop Mode. Set the VOLUME to minimum. Press and hold the 'VOL. DOWN' button on the front panel. Simultaneously press and hold the '4' key on the remote control unit. Hold both keys for more than 1 second. The On Screen Display message 'INITALIZE5 COMPLETE' will appear. The Tray Lock has now been cleared.
NB: The above procedure will reset ALL of the player's settings to the default factory state.
A1-5
|
|
 |
> |
|