|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
;
We needed a manual quickly...online it was available immediately, at a very low price. We loved the convenience!
;
Excellent!!
Got what I need and very fast!!
Thank You
;
One address for rare manuals.Very good copy. Thank you.
Your
Klaus Husse
DISASSEMBLY INSTRUCTIONS
1-5: AV PCB/DVD PCB/DECK CD (Refer to Fig. 1-5) 1. Make the short circuit on the position as shown Fig. 1-5 using a soldering. If you remove the Deck CD with no soldering, the Laser may be damaged. 2. Disconnect the following connectors: (CP8001, CP8002 and CP8005). 3. Remove the 4 screws 1. 4. Remove the Deck Angle in the direction of arrow (A). 5. Disconnect the following connectors: (CP2301, CP2302 and CP2601). 6. Remove the 4 screws 2. 7. Remove the Deck CD in the direction of arrow (B). 8. Remove the 4 screws 3. 9. Remove the DVD PCB in the direction of arrow (C). 10. Remove the 3 screws 4. 11. Remove the AV PCB in the direction of arrow (D).
Pick Up PCB
2 2
Deck CD
2
2
Make the sort circuit using a soldering.
3 3 3
DVD PCB
(B)
3
1
(C)
1
1
Deck Angle
1
AV PCB
(A)
4
4 4
(D)
Bottom Plate
Fig. 1-5 NOTE When the installation of the Deck CD, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector.
B1-2
|
|
|
> |
|
