SHARP MDM3H
Owner's Manual

(Continued)
s Recording from a CD onto a MiniDisc (One-Touch Editing)
A CD can be recorded to a MiniDisc, starting from the first track, with a one-touch operation. Caution: q Recording will begin, starting from the first track of CD. q After recording (all of the tracks that can be recorded), the unit will stop automatically. q When a recording is made at high speed, the playback sound will not be heard. q When a damaged CD is recorded at high speed, the unit may stop whilst recording, or some noise or a drop out may be recorded. In this case, record the CD at normal speed. Notes: q When the CD playing time is longer than the available MD recording time, the recording process will not start even when the CD 0 MD EDIT button is pressed.

3 1 3 4
H

2

Number of tracks left for recording

Available recording time

2 1

H

q To record as many tracks as are available, press the CD 0 MD EDIT button again. However, if the available recording time on the MD is less than the length of the first track on the CD, when the CD 0 MD EDIT button is pressed, the following display will appear.

1 Press the ON/STAND-BY button to turn the
power on.

Then, when the CD 0 MD EDIT button is pressed again, recording will start. However, when the MD runs out of space, �DISC FULL� will be displayed and the CD and MD will stop.

2 Press the CD button. 3 Load a compact disc and a recordable MiniDisc.
q The total number of tracks and the total playing time on the CD will be displayed. q When a new recordable MiniDisc is loaded, it will take about 15 seconds to enter the recording stand-by mode.

To check the remaining time available for recording:

1 2 3

Press the MD button. Load a MiniDisc.

4 Press the CD 0 MD EDIT (HIGH or NORMAL)
button. q Press the EDIT button to NORMAL for actual speed, HIGH for high-speed recording.
0 TOC
TOC

Press the DISPLAY button to find a time followed by hyhone. q The total the number of tracks previously recorded and the available time remaining will be displayed, 4 seconds later, the unit will return to the original display.

To cancel the operation:
Before pressing the CD 0 MD EDIT (HIGH or NORMAL) button, press the s button.

To stop recording:
REC

REC

q The compact disc loaded will be recorded in order, starting from the first track. When a MiniDisc runs out of recording space or when a compact disc has been completely recorded, the CD and the MD will stop automatically.

Press the s button. q Playback and recording will stop and the track numbers will be written to the MiniDisc. It is not possible to pause in the recording mode.

29