|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
ERROR MESSAGES
Error messages Meaning Remedy the AC adaptor for power). disc.
The run down. Charge the rechargeable battery or
BATT EMPTY replace the alkaline batteries (or use
Nothing is recorded. Replace the disc with a recorded BLANK DISC
No copy can be made because of Record using the analogue cable. Can't COPY the SCMS copyright system. A track cannot be edited. Change stop position of the Can't EDIT track and then try editing it.
Recording cannot be performed Re-record or replace it with another
Can't REC correctly due to vibration or shock recordable disc.
in the unit.
Can't WRITE Editing is impossible. Check the number of tracks. try recording again. DEFECT Replace the disc with another recordable disc.
The disc scratched. If the sound you hear is not right,
Din UNLOCK Poor connection of cable. Connect the digital cable securely. DISC ERROR The is damaged. Reload the disc or replace it. disc. original position.
The disc is out of recording space. Replace it with another recordable DISC FULL
The unit is in safety mode. Return the HOLD switch to its HOLD
�7�
sources. unit. while.
LOCKED The EJECT lever was moved Turn off power and remove the LOCK ERROR during recording or editing. MiniDisc. NO DISC A disc has not been loaded. Load a disc.
PROTECTED only Replace it with a recordable disc.
The disc is protected. Move the write protection knob PB DISC You tried record on a playbackback to its original position.
Improper is being supplied. Use one of the specified power POWER ?
Since track number is currently Wait for a while and try the
SORRY being located or written to, the unit operation again.
cannot accept your command. You come conclusion To have it repaired, go to the
SYSTEM ERR that unit is out of order. distributor where you purchased the
The temperature is too high. Turn off the power, and wait for a TEMP OVER
A large portion of the disc has been Replace it with another recorded TOC ERROR damaged. disc. There is no space left for recording Replace it with another recordable
TOC FULL character information (track names, disc.
MD-MS701H/MS702H
Tr. Protect
disc names, etc.). The has been protected from Edit track with the device on being erased. which it was recorded. A large portion of the disc has been Replace it with another recorded damaged. disc. U TOC ERROR There is an error in recorded Erase all of the signal errors, and signal. then try recording again. data other A disc which contains non-music than music was data cannot be played. ? DISC There is an error in the signal from Replace it with another recorded the disc.
|
|
|
> |
|
