|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
MDR-7505
1-3. HUNGER (L)
2 Cushion stopper (upper)
Precaution during installation
Adjust the distance between the slider holder and harness to the specified distance as shown. Slider holder (L side)
4
1 Two screws (+P2 � 6)
0 � 2 mm 5
3 Cushion stopper (lower) (L)
Precaution during installation
4 Claw 5 Slider Route the harness into the groove and the rib of the portion A as shown.
3 Slider cap (L) 7 Harness 9 Slider cap lid (L) A
6 2 Two screws (+P2 � 6) 1 Two screws (+P2 � 6)
Precaution during installation
8 Place the hunger in the direction as shown and route the harness coming from the slider cap lid through the hole of the portion B on the Ginbal.
2 Ginbal (L) Route the harness into the groove inside the portion C.
3 Hunger (L) 1 Ginbal shaft B C
�3�
|
|
|
> |
|
