SONY MDS-JE500
Owner's Manual

Recording on MDs

6

� AMS ±

Synchro-Recording With Audio Equipment of Your Choice
g

�

±

�

�

�

By using the MUSIC SYNC button on the remote, you can automatically start recording in sync with the signal input from the program source through the LINE (ANALOG) IN jacks or the DIGITAL IN connector (Music Synchro-Recording). The method of marking track numbers differs,
T.REC

� �

�

0

10

§ EJECT

·

P

p

r
REC

1

Do Steps 1 to 6 in �Recording on an MD� on pages 6 and 7. The deck changes to recording pause. Start playing the program source you want to record. The most recent 2 seconds of audio data is stored in the buffer memory. Press AMS (or T.REC) to start Time Machine Recording. Recording of the program source starts with the 2 seconds of audio data stored in the buffer memory. To stop Time Machine Recording
Press p.

2

3

Note
Thedeckstartsstoringaudiodatawhenthedeckisin recordingpauseandyoustartplayingtheprogramsource. Withlessthan2secondsofplayingoftheprogramsource andaudiodatastoredinthebuffermemory,TimeMachine Recordingstartswithlessthan2secondsofaudiodata.

�

0

)

�

·
= 0 + )

P
r

p

depending on the program source being recorded and how the deck is connected to the program source. (See �Notes on Recording� on page 9.)

6

·
= 0 + )

P
r

p

MUSIC SYNC

1 2 3

Do Steps 1 to 5 in �Recording on an MD� on page 6. Press MUSIC SYNC. The deck changes to recording pause. Start playing the program source you want to record. The deck starts recording automatically. To stop Music Synchro-Recording
Press p.

Note
WhenMusicSynchro-Recording,theSmartSpaceFunction andtheAutoCutFunctionturnonautomaticallyregardless of their setting (ON or OFF) and type of input (digital or analog).

13