|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
1.29 Ink Absorbers
Caution
Once removed, the components given in this subsection require the purge unit adjuster for reassembly. Refer to Section 3, "ADJUSTMENT" in this chapter.
After the main PCB is replaced with any other one, you need to replace the ink absorbers with new ones. (1) Pull out the ink absorbers from the drain tank. NOTE: Use vinyl gloves to prevent your hands from becoming dirty. (2) If the main chassis or the surrounding parts are stained with ink, wipe them with a waste cloth.
n
Reassembling Notes � When setting ink absorbers into the drain tank, use a screwdriver and the like.
1.30 Drain Tank
Caution
Once removed, the components given in this subsection require the purge unit adjuster for reassembly. Refer to Section 3, "ADJUSTMENT" in this chapter.
(1) Remove the screw and lift up the drain tank from the bottom plate.
IV - 65
|
|
|
> |
|
