|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Recording tracks
4) Adjust the recording level for track 2, in the same way as shown above (see "Setting the level"). Use the LEVEL and PAN controls for track 1 to control the track 1 sound. Use the MASTER control to adjust the overall monitor level.
5) When you are ready, press the REW button to rewind the tape and press the RECORD button to start recording.
6) Press the STOP button to stop recording.
7) Press the REW button to rewind and press the PLAY button to start playback. Adjust the level and pan position of the two tracks with the LEVEL and PAN controls for tracks 1 and 2.
8) If you are not satis�ed with your recording, try again. The MF-P01 has 4 tracks. You can record two more musical tracks (another guitar part, harmony vocals, bass, etc.) to tracks 3 and 4, in the same manner described above, while monitoring the previously recorded tracks.
Mixing down tracks
After completing recording, the next (�nal) process is "mixdown". We assume that all the four tracks are recorded.
Setting up
1) Unplug the stereo headphones. NOTE When headphones are plugged in, the audio performance from the LINE OUT jacks is slightly degraded. WARNING Before making the connections below, make sure that all equipment is turned off. 2) Connect the LINE OUT jacks of the MF-P01 to the AUX IN (or TUNER IN, CD IN, TAPE IN, etc) of your ampli�er. 3) Connect the master recorder to the ampli�er appropriately (see page 6). 4) Set the ampli�er�s input source to the MF-P01 and the level volume appropriately. NOTE You may directly connect the MF-P01 LINE OUT jacks to the recorder�s line input jacks without using any ampli�er.
12
PORTASTUDIO MF-P01
|
|
|
> |
|
