|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Caring for the Filters
The grease filters should be removed and cleaned often, at least once a month. NOTE: if your microwave hood combination is installed to recirculate air, the charcoal filter [Part No. 4358003) should be replaced every 6-12 months. The charcoal filter can not be cleaned.
1.
For your personal safety, turn off the electric power at the main power supply.
2. To remove slide each
grease filters, filter to the front.
Pull filters downward and push to the rear. The filter will drop out.
3. Soak grease filters in hot water and a mild detergent. Scrub and swish to remove embedded dirt and grease. Rinse welt and shake to dry. Do not use ammonia or place in a dishwasher. The aluminum will darken.
4. To replace grease filters, slide filter in the frame slot on the front of the opening. Push filter upward and push to the rear to lock into place.
5. To replace charcoal filter: remove the vent cover mounting screws. 6. Tip the cover forward, lift out to remove. then
7. Lift the back of the charcoat filter. Slide the filter straight out.
8.
Slide a new charcoal fitter into place. The filter should rest at the angle shown.
9. Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws. 18. Turn the power back at the main power SUPPlY. on
11. Do not operate the hood without the filters in place.
28
|
|
|
> |
|
